A document-led starting point for the SPF5000ES/6000ES connection, with a separate high-voltage reference for ELEMAGIC-10.2 HV.
Which Growatt models does the low-voltage document name?
The low-voltage source explicitly names SPF5000ES/6000ES. The ELEMAGIC-10.2 HV V1.1 source is a separate high-voltage reference, and must be checked against the actual Growatt inverter and battery configuration.
Scope and checks
Do not extend SPF instructions to all Growatt series. Confirm the full model, battery BMS and firmware, communication cable and protocol before installation.
The four-page low-voltage guide explicitly names Growatt SPF5000ES/6000ES. It contains communication pin definitions, battery address settings, the BMS-to-CAN connection and LCD configuration screens. These named models define the document’s starting scope; they are not a statement about all Growatt inverters.
Keep high-voltage references separate
The ELEMAGIC-10.2 HV V1.1 document describes a different arrangement involving master/slave battery connections, power-control links and communication. Use it only after the exact high-voltage battery and Growatt inverter combination has been confirmed. Do not carry low-voltage settings across simply because the brand is the same.
Make repeat installations traceable
For an installation enquiry, provide the full SPF model, EITAI battery model, BMS and inverter firmware, quantity and country. Record the selected guide revision and confirmed cable reference. This creates a practical handover record for commissioning, later service and repeat procurement.
FAQ
Does this SPF guide also apply to every Growatt high-voltage system?
No. The SPF5000ES/6000ES document and the ELEMAGIC-10.2 HV document describe different configurations. Confirm the actual combination first.