EITAI batteries with Deye: choose the right connection document.
Low-voltage and high-voltage systems use different battery architectures. Start with the exact EITAI battery and the complete Deye model, then use the matching document.
Can I use one connection guide for all EITAI–Deye systems?
No. Choose the low-voltage reference or the ET-51.2V314Ah-HV high-voltage reference according to your battery architecture and the complete Deye model. Use the battery manual alongside the selected connection guide.
Scope and checks
The high-voltage source names the SUN-29.9–50K-SG01HP3 family. Low-voltage and high-voltage instructions are separate. The exact battery, BMS, inverter suffix and firmware still need confirmation.
The low-voltage guide covers communication pin definitions, battery address settings, the BMS-to-CAN connection and inverter setting screens. The high-voltage document identifies ET-51.2V314Ah-HV and the Deye SUN-29.9–50K SG01HP3 family, and covers assembly, power connections, communication and configuration. Select by the equipment being supplied; the two documents are not interchangeable.
Prepare a useful installation brief
Send the battery model, BMS version, full inverter model suffix, installation country and proposed battery quantity. Include the communication cable reference and firmware versions when available. This gives the team the information needed to identify the applicable setup, rather than relying on a shared connector or nominal voltage alone.
Keep the commissioning record
Use the model-specific manual for installation and the applicable connection guide for communication settings. Record the document revision, cable used and configuration confirmed by the installer. If equipment or firmware changes, review the combination again before repeating the setup on another project.
FAQ
Does this cover every Deye inverter?
No. Use the document for the stated battery and inverter configuration, and confirm the complete model and firmware.